Smart Avi HDMVplus Multiviewer - Manual (Page 7)

7 www.smartavi.com
Using the On Screen Display
The OSD can be accessed by using either the “MENU” button on the front control panel or
through hotkey commands “Hotkey + Hotkey + O”, for example if your hotkey is left ctrl
(by default) press “Ctrl + Ctrl+ O” and the OSD will come up. The OSD allows you to change
modes, change the hotkey button, move the OSD position, toggle the hot plugs, and restore
the HDMV-Plus to factory defaults.
To change modes with the OSD simply navigate with the attached keyboard and press the up
and down arrow keys, press the right key to activate the submenu and the left to deactivate
it. To select a new mode scroll down to the input and press the right arrow key on the
keyboard. Use the up and down arrow keys again to select Full, Quad, or PiP and press enter
to change the mode.
The hotkey button itself can be changed by using the up and down arrow in the OSD and
pressing right arrow on “HK:” Next, a submenu will come up with the option to change the
hotkey to ctrl, shift, and alt.