High frequency, Owner recognition – Directed Electronics 550ESP User Manual
Page 28
25
©
1999 Directed Electronics, Inc.
trol unit and fail to operate the system. To re-sync the remote sim-
ply press
several times within range of the vehicle. The alarm
will automatically re-sync and respond to the transmitters normally.
High Frequency
Your system transmits and receives at 434 MHz. This provides a cleaner
spectrum with less interference and a more stable signal. Enjoy a phe-
nomenal increase in range, even in areas with high radio interference.
Owner Recognition
Owner Recognition is a revolutionary new feature available only
from DEI
®
. Using a DEI
®
Bitwriter, hand-held programming tool, your
dealer can program many of the system settings. The programmer
makes it possible to program different settings for each transmit-
ter that is used with the system. Then, whenever a specific trans-
mitter is used, the system will recall the settings assigned to that
transmitter. Owner Recognition lets up to four users of the system
have different settings that meet their specific needs. It is almost
like having four separate alarms in your vehicle, one for each user.
NOTE: Owner Recognition cannot be programmed without a Bitwriter and
the necessary software. Check with your dealer for more information.