Directed Electronics 550ESP User Manual

Page 18

1999 Directed Electronics, Inc.

You can also activate Valet

Mode using the remote transmitter:

1. Open any vehicle door.

2. Press

3. Press

4. Press

again.

The status LED will light solid if you are entering Valet

Mode and

will turn off if you are exiting Valet

Mode.

This feature allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm up

the engine, as well as adjust the interior temperature of the vehi-

cle with the climate control system. If interior heating or cooling

is desired, the climate controls must be preset, and the fan blower

must be set to the desired level prior to remote starting the

vehicle.

IMPORTANT! (1) Never remote start your vehicle when the keys are in the
ignition, except when performing Valet

Take-Over, and (2) Never start

the vehicle if it is not in either PARK or NEUTRAL.

Pressing

and

at the same time will begin the remote start

sequence. The parking lights will flash to warn that the motor is

about to start. It is important to release the transmitter buttons

as soon as the parking lights flash. If the buttons are pressed

longer than two seconds, the remote start sequence will stop.

Remote Start

Remote Valet