Sierra Video 10 Series - Manual (Page 7)

SIERRA VIDEO
1
Introduction
The Sierra Video -10 Audio and Video distribution amplifiers offer high performance
solutions to your video and audio distribution needs. A wide variety of plug-in modules
can be used in a choice of two 3RU (801012 or 801028) or a 1 RU (801014) frame for
video. And a 3RU audio frame for stereo or mono configurations.
The frames provide low voltage AC input to each module. The Series 10 modules can be
removed or re-inserted with power to the frame either on or off.
The 801012 video frame has 10 separate outputs for each module with slots for up to 10
modules, while the 801028 video frame has 4 outputs for each module with slots for up to
20 modules. Only the outputs which are used need to be terminated.
The 801017 audio frame has 10 balanced outputs for each module with slots for up to 10
modules. Inputs and outputs can be wired for balanced or unbalanced operation.
Warnings & Safety Regulations
The information in the following section provides important warnings and safety
guidelines for both the operator and service personnel. Specific warnings and cautions
may be found throughout this manual. Please read and follow the important safety
precautions noting especially those instructions relating to risk of fire, electrical shock and
injury to persons.
Any instructions in this manual that require opening the equipment cover or enclosure are
intended for use by qualified service personnel only. To reduce the risk of electrical
shock, do not perform any servicing other than what is contained in the operating
instructions unless you are qualified.
Warnings
 Heed all warnings on the unit and in the operating instructions.
 Disconnect AC power before installing any options.
 Do not use this product in or near water.
 This product is grounded through the grounding conductor of the power
cord. To avoid electrical shock, plug the power cord into a properly wired
receptacle before connecting inputs and outputs.
Chapter 1