Sierra Video UDC-162 - Manual (Page 15)

UDC-162 Owner’s Manual 
(V 1.2) Page 15 of 32
Audio Delay
Reports the amount of current audio delay. The audio delay always matches the video delay.
Reset Frame Sync
Resets the frame sync, clearing any buffered audio and video. You must reset the framesync after
manipulating the horizontal and vertical offset in order re-establish correct audio and video co-timing.
Scaler Submenu
Menu Structure Parameter Type
Sclr Enbl Scaler Enable
In Input Format Detected
Out Output Format Selected
SDIn Out SD Output Format Select
H720 Half Rate 720p
ARC Aspect Ratio Control Preset
User H User Def. Horizontal Aspect
User V User Def. Vertical Aspect
HDIn Out HD Output Format Select
H720 Half Rate 720p
ARC Aspect Ratio Control Preset
User H User Def. Horizontal Aspect
User V User Def. Vertical Aspect
Scaler Enable
Turns the scaler on and off.
Input Format Detected
Displays the format and rate of the input video signal.
Output Format Selected
This is the format output from the SDI BNCs after the scaler setup rules are applied.
SD Output Format Select
Selects between upconverting to 1080p, 1080i, 720p, or re-aspecting to SD when SD is the detected
input format.
HD Output Format Select
Selects between re-aspecting/cross converting to 1080p, 1080I, 720p, or down converting to SD when
HD is the detected input format.
Half Rate 720p
When enabled and the output format is 720p50, 720p60, or 720p59.94 this will divide the output rate
in half giving 720p25, 720p30, or 720p 29.97.