Sierra Video Tahoe Series 16 - Manual (Page 17)

Sierra Video Systems
11
Installation
Introduction
Installation procedures are similar for all four frames covered under this manual.
Exceptions, if any, have been noted in each of the following paragraphs.
Rack Mounting
Carefully inspect the frame to ensure that there has been no shipping damage. Make
sure all shipping material is removed from the router frame.
Each of the routing switchers described in this manual can be rack mounted in a standard
19" (RU) EIA rack assembly and includes rack "ears" at the ends of the front of the
frames. None of the switcher models require spacing above or below the unit for
ventilation. If ample space exists, a 1RU spacing gap is recommended.
To rack mount any of the routing switchers, simply place the unit's rack ears against the
rack rails of the rack, and insert proper rack screws through each of the holes in the rack
ears. Always rack mount the routing switcher prior to plugging the unit into a power
receptacle or attaching any cables.
Dimensions
Frame Height Depth Width
804040 3 RU (5.25”) 16 ½” 19”
804056 4 RU (7”) 16 ½” 19”
804058 3 RU (5.25”) 16 ½” 19”
Chapter 2