Sensoray 621 - Manual (Page 4)

Sensoray Model 621/721 Instruction Manual Page 2
Limited Warranty
Sensoray Company, Incorporated (Sensoray) warrants the Model 621/721 hardware to be free from
defects in material and workmanship and perform to applicable published Sensoray specifications for
two years from the date of shipment to purchaser. Sensoray will, at its option, repair or replace
equipment that proves to be defective during the warranty period. This warranty includes parts and
labor.
The warranty provided herein does not cover equipment subjected to abuse, misuse, accident, alteration, neglect,
or unauthorized repair or installation. Sensoray shall have the right of final determination as to the existence and
cause of defect.
As for items repaired or replaced under warranty, the warranty shall continue in effect for the remainder
of the original warranty period, or for ninety days following date of shipment by Sensoray of the
repaired or replaced part, whichever period is longer.
A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked
on the outside of the package before any equipment will be accepted for warranty work. Sensoray will
pay the shipping costs of returning to the owner parts that are covered by warranty.
Sensoray believes that the information in this manual is accurate. The document has been carefully reviewed for
technical accuracy. In the event that technical or typographical errors exist, Sensoray reserves the right to make
changes to subsequent editions of this document without prior notice to holders of this edition. The reader should
consult Sensoray if errors are suspected. In no event shall Sensoray be liable for any damages arising out of or
related to this document or the information contained in it.
EXCEPT AS SPECIFIED HEREIN, SENSORAY MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR
NEGLIGENCE ON THE PART OF SENSORAY SHALL BE LIMITED TO THE AMOUNT THERETOFORE
PAID BY THE CUSTOMER. SENSORAY WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM
LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES,
EVEN IF ADVISED OF THE POSSIBILITY THEROF
Special Handling Instructions
The Model 621/721 circuit board contains CMOS circuitry that is sensitive to Electrostatic Discharge
(ESD).
Special care should be taken in handling, transporting, and installing the model 621/721 to prevent ESD
damage to the board. In particular:
?
Do not remove the circuit board from its protective anti-static bag until you are ready to configure
the board for installation.
?
Handle the circuit board only at grounded, ESD protected stations.
?
Remove power from the PCI system before installing or removing the circuit board.