Sensoray 711 User Manual
Page 16
Sensoray Model 711 Instruction Manual
17
CRUSH
Controls the AGC mode. Can be one of the following:
Value Description
CRUSH_OFF
Nonadaptive AGC.
CRUSH_ON
Adaptive AGC. Overflows in A/D's result in the
input voltage range increase.
VFILT
Controls the number of taps in the vertical scaling filter. Can be one of
the following:
Value Description
If YCOMB is set to YCOMB_ON:
VFILT_0
2-tap filter.
VFILT_1
3-tap filter. Only available if scaling to less
then 385 horizontal active pixels.
VFILT_2
4-tap filter. Only available if scaling to less
then 193 horizontal active pixels.
VFILT_3
5-tap filter. Only available if scaling to less
then 193 horizontal active pixels.
If YCOMB is set to YCOMB_OFF:
VFILT_0
2-tap interpolation only.
VFILT_1
2-tap filter and 2-tap interpolation. Only
available if scaling to less then 385 horizontal
active pixels.
VFILT_2
3-tap filter and 2-tap interpolation. Only
available if scaling to less then 193 horizontal
active pixels.
VFILT_3
4-tap filter and 2-tap interpolation. Only
available if scaling to less then 193 horizontal
active pixels.
COLOR_BARS
Controls a test color bar pattern. Can be one of the following:
Value Description
COLORBARS_OFF Color bars off.
COLORBARS_ON
Color bars on.
GAMMA
Controls gamma correction removal. Can be one of the following:
Value Description
GAMMA_REMOVE_ON Gamma correction removal on.
GAMMA_REMOVE_OFFGamma correction removal off.
PKTP
FIFO trigger point. Can be one of the following:
Value Description
PKTP4
4 DWORDs.
PKTP8
8 DWORDs.
PKTP16
16 DWORDs.
PKTP32
32 DWORDs.
bimodal
Controls whether the acquisition mode is normal (both fields are
captured in the same color format), or bimodal (second field is
captured
in monochrome). Bimodal capture allows acquisition of 2 fields of the
same interlaced frame in different color formats: the first (odd) being
captured in any format specified by MODE.color setting, the second
(even) being monochrome (1 byte/pixel). This capture mode could be
beneficial for applications that have to locate an object within the
image, which is easier to do in monochrome, and then analize color
information of the located object using the coordinates obtained