Sensoray 711 - Manual (Page 15)

16 Sensoray Model 711 Instruction Manual
set
to LDEC_ON. Can be one of the following:
Value Description
HFILT_AUTO
The filter is selected automatically depending
on the scale setting. When horizontal scaling
is between full and half resolution, no filtering
is selected. When scaling between one-half and
one-quarter resolution, the CIF filter is used.
When scaling between one-quarter and
one-eighth resolution, the QCIF filter is used.
When
scaling below one-eighth resolution, the ICON
filter is used.
HFILT_CIF CIF filter.
HFILT_QCIF QCIF filter.
HFILT_ICON ICON filter.
RANGE Determines the range of the luminance output. Can be one
of the following:
Value Description
RANGE_NORM
Normal operation (luma range 16-253).
RANGE_FULL Full range operation (luma range 0-255).
CORE Controls the coring value. When coring is enabled, luminance levels
below a certain value are truncated to 0. Can be one of the following:
Value Description
CORE_OFF
Coring disabled.
CORE_8 Coring threshold is 8.
CORE_16 Coring threshold is 16.
CORE_24 Coring threshold is 24.
YCOMB Controls the luminance comb filtering. Can be one of the following:
Value Description
YCOMB_OFF
Vertical low-pass filtering and vertical
interpolation.
YCOMB_ON Vertical low-pass filtering only. The number of
filter taps is determined by VFILT setting.
CCOMB Controls the chrominance comb filtering. Can be one of the following:
Value Description
CCOMB_OFF
Chroma filter disabled.
CCOMB_ON Chroma filter enabled.
ADELAY Back-porch sampling delay. The default values are 0x68 (NTSC),
and 0x7F (PAL/SECAM).
BDELAY Subcarrier sampling delay. The default values are 0x5D (NTSC),
and 0x73 (PAL/SECAM).
SLEEP Controls sleep mode of luma and chroma A/D's. Can take the
following
values:
Value Description
SLEEP_OFF
Both A/D's operating.
Y_SLEEP Luma A/D in sleep mode.
C_SLEEP Chroma A/D in sleep mode. Y_SLEEP and
C_SLEEP can be ORed, to disable both A/D's.