Seaward A203ES - Manual (Page 3)

GENERAL GUIDANCE NOTES
GENERAL INFORMATION
Limited Warranty & Limitation of Liability
CLARE Instruments Limited guarantees this product for a period of 1 year. The period of warranty will come
into effect on the day of delivery.

Copyright 2000
All rights reserved. Nothing from this edition may be multiplied, or made public in any form or manner, either
electronically, mechanically, by photocopying, recording or in any manner without prior written consent from
CLARE Instruments Limited. This also applies to any accompanying drawings, diagrams or illustrations.
E&OE
The information contained within this manual is given in good faith and is provided for guidance only.
Although all reasonable care has been taken to ensure accuracy of the information, CLARE Instruments
Limited, their agents and distributors, accept no responsibility for any errors or omissions within this
document, nor for any misinterpretations by the user. For clarification on any part of this document please
contact CLARE Instruments Limited, or your local agent, before operating the instrument.
Due to a policy of continuous development CLARE Instruments Limited reserve the right to alter or amend
equipment specifications and descriptions outlined in this publication without prior notice. No part of this
publication shall be deemed to form, or be part of, any contract for the equipment unless specifically referred
to as an inclusion within such contract.
Design Principles
The design of CLARE Test & Measurement instruments meets the European Commission Directive No.
73/23/EEC, relating to the “Low Voltage Directive”. This is in accordance with BS EN 61010-1: 1993 –
Safety requirements for electrical equipment for measurement control, and laboratory use. This unit is also
compliant with EN 50191 Draft.
The design of the equipment is safe when used under the following conditions:
♦ Indoor use.
♦ Altitude up to 2000 m.
♦ Temperature 5°C to 40°C.
♦ Maximum relative humidity 80% for temperatures up to 31°C to 50% at 40°C.
♦ Mains supply voltage fluctuations of ±10% of the nominal voltage.
The user MUST follow the remainder of this section on safety, installation, guidance and maintenance to
guarantee safe operation and to maintain the equipment is a safe condition.
WARNING!
Any interruption of the protective earth conductor (mains input earth) inside or outside the equipment is likely
to make the equipment dangerous. The user must not intentionally interrupt the protective earth conductor.
OM_A203ES Page 3 of 3