Sea Eagle Sport Kayak (SE 330, SE 370) - Manual (Page 7)

Accessories
4-Part Paddle
Each paddle includes
two shafts, two blades
and 2 drip guards.
Its important to follow
the directions exactly as
assembling the paddles
incorrectly may leave
you with an inoperable
paddle that cannot be
disassembled.
Begin by locating the
shaft with 3 pre-drilled
holes and using the
push pin on the other
shaft, join the two shafts
together so that the 3
pre-drilled holes now
form the middle of the
paddle.
The 3 pre-drilled holes
are used for feathering
so that you can position
one blade to 90° from
the other. This makes
paddling into a stiff
breeze easier because
the blade that is not in
the water will be able to
slice through the wind
with little resistance.
Next, slide a drip guard
over each end of the
shaft, positioning the
drip guards so they are
on the outside of your
hands (closest to the
pinky finger). Connect
the paddle blades to the
end of each shaft to
complete assembly.
Accessories (OPTIONAL)
Optional Accessories
(OPTIONAL)
We offer a wide variety
of accessories and
some accessories may
be considered optional
if they were not included
with the package that
you purchased.
Sea Eagle QuikSail
(OPTIONAL)
Converts any kayak into
a sailing vessel. Easily
deploys in under one
minute, breaks down to
just 43" for convenient
storage in the bow or
stern and sails up to 45°
left or right. Comes
complete w/separate
instruction manual.
Squid Anchor Kit
(OPTIONAL)
No assembly required,
it's fast and easy to use.
It weighs only about 7
oz. when empty and
can be filled up to 11
lbs. The anchor can
also be flipped inside
out to become its own
compact storage bag.
Bow Float
(OPTIONAL)
Used for whitewater, the
bow float sits in the bow
of the boat and adds
buoyancy to your kayak
and can also double as
a foot rest. Inflates
using the foot pump and
cone shaped adapter
from the triple nozzle.
6