Sea Eagle Sport Kayak (SE 330, SE 370) User Manual

Page 12

2-Part Adhesive
The adhesive that
comes standard in your
repair kit works for most
repairs and installations,
but for more detailed
and extensive repair we
recommend a 2-part
PVC adhesive.

Methyl Ethlyl Ketone
Methyl Ethyl Ketone or
MEK is a solvent used
to dissolve PVC based
glue in case you need
to remove a D-Ring,
glue residue or patch.
MEK is a strong solvent
and can damage the
material to the boat so
use it very carefully and
sparingly.

MEK is very flammable,
keep away from fire, lit
cigarettes or sparks.
When handling MEK we
recommend wearing
rubber gloves. Be sure
to use MEK in a well
ventilated area and
heed all warnings from
the manufacturer.

To remove a patch with MEK, dip a cotton swab and apply
it to the outer edges. The glue will start to dissolve and the
patch will begin to separate from the boat. Continue to
carefully apply MEK to the underneath of the patch and
continue peeling it off. Once removed you can also clean
off any residual glue with the MEK solvent. To apply a new
patch, allow approximately 30 seconds for the MEK to
evaporate and apply the item to the boat.