Scotsman FM2400 - Manual (Page 3)

Installation Limitations:
This ice system is designed to be installed
indoors, in a controlled environment:
Min Max
Air Temperature 50
0
F 100
0
F
Water Temperature 40
0
F 100
0
F
Water Pressure 20 PSI 80 PSI
Voltage -5% +10%
(Compared to the nameplate)
Operating the machine outside of the
limitations is misuse and can void the warranty.
Water Limitations:
An ice machine is a food manufacturing plant;
it takes a raw material, water, and turns it into
a food product, ice. The purity of the water is
very important in obtaining pure ice and in
maximizing product life. This is not intended
as a complete resource for water related
questions, but it does offer these general
recommendations:
1. Check with a water treatment specialist for
a water test, and recommendations regarding
filters and treatment.
2. In most cases, the water used to make ice
should be filtered or treated, depending upon
the water.
There is no one type of water filter
that will be effective in all situations. That is
why a water test is important.
Scotsman Ice Systems are designed and
manufactured with the highest regard for
safety and performance. They meet or
exceed the standards of UL, NSF, and CSA.
Scotsman assumes no liability or responsibility
of any kind for products manufactured by
Scotsman that have been altered in any way,
including the use of any part and/or other
components not specifically approved by
Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to
change without notice.
FOR THE INSTALLER: Environmental Limitations
1.25"
21.12" Drain
3/4"
FPT
Typical Storage Bin - B590
FM2400
June, 1989
Page 3