Fm2400, Maintenance: air cooled – Scotsman FM2400 User Manual
Page 18
5. Clean each air cooled condenser. Use a
vacuum cleaner or coil cleaner if needed. Do NOT
use a wire brush.
////////////////////////////WARNING///////////////////////////////
Disconnect electrical power.
/////////////////////////////////////////////////////////////////////////////
A. Remove top panel.
C. Pull fan motor assembly off of locating pins
and out of the unit.
B. Remove two screws, and unplug the fan motors.
D. Clean the condenser; reassemble by
placing the fan motor assembly onto the
loacting pins, replacing the mounting screws,
plugging the fan motors back in, and
replacing the top panel. Reconnect power.
TOP
PANEL
FAN MOTOR
ASSEMBLY
CAP SCREW
LOCATING
PINS
UNPLUG
LEADS
MAINTENANCE: Air Cooled
FM2400
June, 1989
Page 18