beautypg.com

Scotsman CU1526 User Manual

Page 4

background image

Model Number Description

Example:

CU2026SA-1A

C= cuber

U=under the counter type

20= nominal ice capacity in 10s of pounds

26= nominal width of cabinet

S= Cube size. S=small or half dice cube.
M=medium or full dice cube

A=Condenser type. A=air cooled. W=water
cooled

-1=115 60 Hz, -32 = 230 volt, 60 Hz

A=Series revision code. A=first series

Note: In some areas of this manual model numbers
may include only the first six characters of the
model number, meaning that the cube size,
condenser type and voltage differences are not
critical to the information listed there.

Product Description & Electrical Requirements

Scotsman ice systems are designed and
manufactured with the highest regard for safety
and performance.

Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any part and/or other components not
specifically approved by Scotsman.

Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to change
without notice.

May 2008

Page 3

CU1526, CU2026, CU3030

User Manual

Dimensions

w" x d" x h"**

(without legs)

Model

Electrical

volts/Hz/phase

Condenser

Total Load

Amps

Maximum

Fuse Size*

26.62 x 27.5 x 33

CU1526SA-1

115/60/1

Air

7.7

15

CU1526SW-1

115/60/1

Water

7.7

15

26.62 x 27.5 x 33

CU2026SA-1

115/60/1

Air

7.2

15

CU2026SW-1

115/60/1

Water

7.2

15

CU2026SA-32

208-230/60/1

Air

3.7

15

CU2026SW-32

208-230/60/1

Water

2.96

15

30.62 x 30 x 33

CU3030SA-1

115/60/1

Air

10.4

15

CU3030SW-1

115/60/1

Water

10.4

15

CU3030SA-32

208-230/60/1

Air

5.54

15

CU3030SW-32

208-230/60/1

Water

4.48

15

Table notes: Height is without legs. Medium cube models have the same electrical characteristics as
Small. Series revision code omitted. * Or HACR type circuit breakers.
** If not using legs, add .25" for screws below base. Legs add 6 to 6.75 inches, but not the 1/4 inch for
the screws. Use of floor mounting kit adds about a half inch.

This manual is related to the following products: