beautypg.com

Model 3vg79a, Maintenance (continued) – Dayton 3VG79A User Manual

Page 7

background image

Dayton Operating Instructions and Parts Manual

7

Model 3VG79A

Version B - For Reduction

G016.J

®

Figure 10 - Adjusting Pump Pressure

Pressure
Gauge

Side
Cover

Bushing, Lower Fuel Line,
and Fuel Filter

Figure 11 - Fuel Filter Removal

Fuel Valve
Fitting

High Voltage.

FUEL VALVE

1. Remove side cover (See Figure 11), fan

guard, and upper shell (See Figure 6,
page 6) screws using 5/16" nut-driver.

2. Remove fan (See Fan, page 6).

3. Pull lower fuel line off the fuel valve

fitting (See Figure 12).

4. Disconnect red and white wires from

fuel valve (See Figure 12).

5. Using 1/4" nut driver remove 2 screws/

lockwashers holding fuel valve and
bracket to lower shell (See Figure 12).
Save these screws/lock washers.

6. Using 1/4" nut driver remove 2 screws

holding fuel valve to bracket. Save these
screws.

7. Attach new fuel valve to bracket with 2

screws.

8. Install new fuel valve and bracket on

lower shell with 2 screws/lockwashers.

9. Connect red and white wires (polarity

not important). Connect upper and
lower fuel lines to fuel valve.

10. Replace fan, fan guard, upper shell, and

side cover.

Lower Fuel
Line

Electrical
Wires

Fuel Valve

Valve
Fittings

Bracket

Screw

Screw

Figure 12 - Fuel Valve Replacement

SPARK PLUG

1. Remove upper shell (See Figur e 6, page 6).

2. Remove fan (See page 6).

3. Remove spark plug wire from spark plug.

Spark Plug Wire

Spark
Plug

Burner Head

4. Remove spark plug and wave spring

washer from burner head using 13/16"
open-end wrench.

5. Clean and regap spark plug electrodes

to .110 gap.

Figure 13 - Spark Plug Removal

Figure 14 - Spark Plug Gap

FUEL FILTER

1. Remove side cover screws using 5/16"

nut-driver.

2. Remove side cover (See Figure 11).

3. Pull lower fuel line off fuel valve fitting.

4. Carefully pry bushing, lower fuel line,

and fuel filter out of fuel tank.

5. Wash fuel filter with clean fuel and

replace in tank.

6. Attach lower fuel line to fuel valve

fitting.

7. Replace side cover.

Gap

Bend Here
to Adjust
Gap

Maintenance (Continued)

Wave
Spring
Washer

Lock Washer