Dayton 3VG79A User Manual

Dayton portable forced air heater, 3vg79a

Operating Instructions & Parts Manual

3VG79A

Dayton Portable Forced
Air Heater

Description

Dayton Model 3VG79A is a 200,000 Btu/Hr heater. This heater uses only Kerosene
or No. 1 fuel oil for combustion and electricity to run the motor. It is primarily
intended for indoor and outdoor temporary heating of well-ventilated buildings
under construction, alteration, or repair. It may be used in agricultural, industrial,
and commercial environments.

Form 5S4068

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Unpacking

1. Remove all packing items supplied

with heater for shipment.

2. Remove all items from carton.

3. Check items for any shipping

damage. If heater is damaged,
promptly inform dealer where you
bought heater.

Figure 1 - Model 3VG79A

ARL LOGO

G 004

Amperage

Model

Electrical Input

(during normal run)

3VG79A

120 Volt/60 Hertz

4.5

ELECTRICAL SPECIFICATIONS

GENERAL SPECIFICATIONS

Output

Hot Air Output

Fuel Tank Capacity

Fuel Consumption

Model

Rating Btu

(CFM Approx)

Fuel

(U.S. Gallons)

(U.S. Gallons/Hr.)

Motor RPM

3VG79A

200,000

600

Kerosene or No. 1 fuel oil

13.5

1.4

3450

Air Pump

Heater Weight

Spark Plug Gap

Model

Pressure (psi)

(Pounds - with fuel)

(Pounds - without fuel)

(Inches)

3VG79A

.110

Version B - For Reduction

G016.J

Printed in U.S.A.
03430
0899/294/VCPVP