Dacor AOMTK30 - Manual (Page 2)

PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
12.2
Convection microwave Oven
DCm24
ACTk27, ACTk30, ACTk36, AOCTk27, AOCTk30
D
“B”
1 1/4” (32mm)
Min. (AOCTK)*
3/4” (19mm)
Min. (ACTK)*
7/8” (22mm)
Min. (AOCTK)*
3/4” (19mm)
Min. (ACTK)*
3
120 Vac,
15 Amp.
3-Prong
Electrical
Outlet
mICrOwAvE AND TrIm kIT
24 3/4”
(629mm)
19”
(483mm)
14 3/4”
(375mm)
DCm24 SPECIFICATIONS
Model No. “A” Overall Width “B” Cutout Width “D” Cutout Height Top Overlay Bottom Overlay
Approximate
Shipping Weight
ACTK27 27” (686mm) 25 1/4” (641mm) 19 1/8” (486mm)
1/2” (13mm) 1/2” (13mm)
15 lbs,
ACTK30 30” (762mm) 28 1/4” (718mm) 19 1/8” (486mm) 16 lbs.
ACTK36 36” (914mm) 25” (635mm) 19 1/8” (486mm) 20 lbs.
AOCTK27 27” (686mm) 25 1/4” (641mm) 18 1/2” (470mm)
5/8” (16mm) 1” (25mm)
19 lbs.
AOCTK30 30” (672mm) 25 1/4” (641mm) 18 1/2” (470mm) 20 lbs.
20 1/8”
(511mm)
1” (25mm)
“A”
ACTk OvErALL DImENSIONS
(Epicure ® or Millennia™ Trim Kit - use these models
when stacking with the Classic/renaissance Wall Oven)
CUTOUT DImENSIONS ISOmETrIC vIEw
AOCTk OvErALL DImENSIONS
(Epicure ® or Millennia™ Trim Kit - use these models
when stacking with the Discovery Wall Oven)
NOTE:
1. 24” (610mm) minimum exterior cabinet depth.
2. See the Combination Installation (CI) Section if
installing with a wall oven, or warming oven.
3. 3/4” (19mm) support platform (flush with cutout).
4. Microwave is supplied with a 42” (1067mm) power
cord, with a three prong grounded plug.
5. Tolerances +1/16” (1.6mm), -0 unless otherwise
specified
1/1
“A”
20 1/8”
(511mm)
18 3/8"
(467mm)
“D”
“B”
15 5/8"
(397mm)
Wooden Supports
2”x 2”
Required for
ACTK 27/30
versions only
Revised
05/05/08
Shipping Weight: 60 lbs.
Circuit required: 120 Vac,
15 Amp. dedicated
Total (Connected Load):
1.6 Kw (13 Amp.)
*Bare minimum spacing: Includes additional space to avoid
scrapping/vibration.