Fig. 4 fig. 3, Fig. 5 fig. 6 – Royal Cozyfires Slimline Standard MK2 - LPG User Manual
Page 5
MM79 010710
1. 4
RE - LAYING THE COAL/PEBBLE BED
Slimline Standard Mk2
Page 4
Metal `stops’
The simulated front is positioned on the shelf directly
in front of the support shelf. Two metal `stops’ locate the
simulated front in position.
Fit the two front retaining brackets with two No 8x3/8 screws supplied
in the fixing pack to secure the front into position (Fig. 4).
The support shelf is positioned on the fibre
support metalwork. There are two metal `stops’ that
prevent the support shelf from sitting on the main
burner outlet (Fig. 3).
Metal `stops’
Fig. 4
Fig. 3
Note: Large coals/pebbles (grey) and small coals/pebbles
(black) are coloured for illustration purposes only !
Place 3 large and 2 small coals/pebbles on top of the simulated
front (one in each groove). Allow the coals/pebbles to rest on
the support shelf. Place 3 large coals/pebbles on the upper tier
of the support shelf (Fig. 5).
Place 4 small coals/pebbles between the 5 coals/pebbles located
on top of the simulated front. Allow the coals/pebbles to rest on the
3 large coals/pebbles located on the top tier of the support shelf.
Place 2 small coals/pebbles between the 3 large coals/pebbles
located on the top tier of the support shelf (Fig. 6).
Fig. 5
Fig. 6
To obtain the best visual appearance, it may be necessary to `
slightly
’ adjust the position of the coals.
If any of the coals or coal bed become damaged or lost, replacements MUST be obtained before further use.
ADDITIONAL COALS/PEBBLES MUST NOT BE USED
Front Retaining Bracket