ROTEL RB971 - Manual (Page 6)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Getting Started
Thank you for purchasing the Rotel RB-971 Stereo Power Ampli-
fier. When used in a high-quality music or home theater system, it
provide years of musical enjoyment.
The RB-971 is a high-power, two-channel power amplifier, provid-
ing the highest level of audio performance. Discrete output de-
vices, a massive power supply, premium components, and Rotel’s
Balanced Design ensure superb sound quality. High current capa-
bility allows the RB-971 to drive the most demanding loudspeakers.
Be aware that the RB-971 is capable of high power levels, in ex-
cess of 70 watts per channel. Make sure that your speakers can
handle the power of the RB-971. If in doubt about your speakers,
ask your local Rotel audio retailer for advice.
The RB-971 is straightforward in its installation and operation. If
you have experience with other stereo power amplifiers, you
shouldn’t find anything perplexing. Plug in a pair of high-quality
RCA cables from your preamp into the amplifier inputs, wire up
your speakers, and enjoy.
A Few Precautions
Please read this manual carefully. In addition to basic installation
and operating instructions, it provides valuable information on
various RB-971 system configurations as well as general informa-
tion that will help you get optimum performance from your system.
Please contact your authorized Rotel audio retailer for answers to
any questions you might have. In addition, all of us at Rotel wel-
come your questions and comments.
Save the RB-971 shipping carton and all enclosed packing mate-
rial for future use. Shipping or moving the RB-971 in anything
other than the original packing material may result in severe dam-
age to your amplifier.
Fill out and send in the owner’s registration card packed with the
RB-971. Also be sure to keep the original sales receipt. It is your
best record of the date of purchase, which you will need in the
event warranty service is ever required.
Placement
Because of its high power output, the RB-971 may generate con-
siderable heat. The heat sinks and ventilation openings in the am-
plifier are more than capable of dissipating this heat under normal
conditions, but don’t smother your amplifier. There must be ad-
equate clearance around the chassis. The ventilation slots in the
top cover must be unblocked, and there must be reasonable air-
flow around the amplifier. Use common sense when placing the
amplifier in a cabinet or when stacking other equipment.
Likewise, remember the weight of the amplifier when you select
an installation location. Make sure that the shelf or cabinet can
support its considerable bulk. Again, use common sense.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
AC Power and Control
AC Power Input 6
Because of its high power rating, the RB-971 can draw consider-
able current. Therefore, it should be plugged directly into a 2-pin
polarized wall outlet. Do not use an extension cord. A heavy duty
multi-tap power outlet strip may be used if it (and the wall outlet)
is rated to handle the current demanded by the RB-971 and all the
other components connected to it.
Be sure the power switch on the front panel of the RB-971 is
turned off (in the out position). Then, connect the supplied power
cord to the AC power outlet.
Your RB-971 is configured at the factory for the proper AC line
voltage in the country where you purchased it (either 115 volts AC
or 230 volts AC with a line frequency of either 50 Hz or 60 Hz). The
AC line configuration is noted on a decal on the back panel.
Note: Should you move your RB-971 amplifier to another country,
it is possible to reconfigure your amplifier for use on a different
line voltage. Do not attempt to perform this conversion yourself.
Opening the enclosure of the RB-971 exposes you to dangerous
voltages. Consult a qualified service person or the Rotel factory
service department for information.
If you are going to be away from home for an extended period of
time such as a month-long vacation, it is a sensible precaution to
unplug your amplifier (as well as other audio and video compo-
nents) while you are away.
Power Switch 1 and Power Indicator 2
The power switch is located on the front panel of your amplifier.
To turn the amplifier on, push the switch in. The LED indicator
above the switch will light, indicating that the amplifier is turned
on. To turn the amplifier off, push the button again and return it to
the out position.
2
STEREO POWER AMPLIFIER RB-971