Specifications, Ra‑1570 stereo integrated amplifier – ROTEL RA-1570 User Manual
Page 13
![background image](https://www.manualsdir.com/files/803007/content/doc013.png)
12
13
RA‑1570 Stereo Integrated Amplifier
Specifications
Continuous Power Output
120 watts/channel
(20-20 kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion (20Hz-20kHz)
< 0.03% at rated power,
1/2 power, or 1 watt
Intermodulation Distortion (60 Hz : 7 kHz, 4:1)
< 0.03% at rated power,
1/2 power or 1 watt
Frequency Response:
Phono Input
20Hz-20kHz, ±0.5dB
Line Level Inputs
10Hz-100kHz, +1, –3dB
Damping Factor (20Hz-20kHz, 8 ohms) 180
Input Sensitivity / Impedance
Phono Input (MM)
2.25mV / 68k ohms
Line Level Inputs (RCA)
285mV / 100k ohms
Line Level Inputs (Balanced)
570mV / 50k ohms
Input Overload
Phono Input
30mV
Line Level Inputs
4V
Preamplifier Output / Impedance
1.5V / 470 ohms
Signal to Noise Ratio (IHF “A” weighted)
Phono Input
80dB
Line Level Inputs
100dB
Digital Section
Frequency Response
10Hz - 95kHz
(±3.0dB, Max)
Signal to Noise Ratio (IHF ”A” weighted)
100 dB
Input Sensitivity/Impedance
0 dBfs / 75 ohms
Preout Level/Impedance
1.2 V/ 470 ohms (at -20 dB)
USB/iPod Digital Signals
WAV, MP3, WMA
(up to 48kHz 16 bit)
Coaxial/Optical Digital Signals
SPDIF LPCM
(up to 192kHz 24 bit)
PC-USB
USB Audio Class 1.0
(up to 24 bit/96kHz)
USB Audio Class 2.0
(up to 24 bit/192kHz)*
*Driver installation required
Power Requirements:
USA:
120 Volts, 60 Hz
EC:
230 Volts, 50 Hz
Power Consumption
400 watts
Standby Power Consumption
< 0.5 watts
Dimensions (W x H x D)
431 x 144 x 350 mm
(17 x 5
7
/
8
x 13
3
/
4
ins)
Front Panel Height
3U (132.6mm, 5
1
/
4
ins)
Weight (net)
13kg, 28.7 lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co, Ltd.,
Tokyo, Japan.
“Made for iPod,” and “Made for iPhone,” means that an electronic
accessory has been designed to connect specifically to iPod or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may affect
wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.