0 instrument specifications – Research Concepts RC1000 User Manual
Page 25

RC1000A Antenna Controller..................................8.0 Instrument Specifications 23
8.0 INSTRUMENT
SPECIFICATIONS
A. Initial
Inspection - Contents
1.
RC1000A Automatic Satellite Antenna Positioner
(19"W x 3.50"H x 5.50"D) 10#
Inspect the unit for any damage during shipping
(i.e., the display is cracked or metal is bent)
If so, notify shipper.
2.
12 pin Input/Output Connector
3. Manual
B. Power
Requirements - 115V AC 60 Cycle, 22W, drive signals inactive
The input power line fuse is a 3.0 amp fast blow. NO SUBSTITUTES ARE
ACCEPTABLE. This is the value necessary to protect the motor in the event a
mechanical limit is encountered or the drive mechanism becomes jammed.
The drive control line fuse is a 6.0 amps, type ABC, and is referred to as F2 on the
component layout schematic on page 28. This value should not be substituted without
consulting the factory.
C.
Drive Transfer Function
See Figure 8.0.
D.
Non-Volatile Memory Battery
Duracell DL2450