Research Concepts RC1000 - Manual (Page 19)

RC1000A Antenna Controller...........................................................6-7 Delete Mode 17
6-7 DELETE Mode
This mode is used to delete a satellite entry.
1. Proceed
to DEL mode (found in PROGRAMMING Mode Group).
2.
Scroll through the ASSIGNED satellite names by pushing A .
3.
When the desired satellite name is shown on screen, push E .
4.
System will automatically delete this satellite from memory and will return to MAN mode.
If it is necessary to delete
all satellite positions from memory:
a. Scroll
MODE to SET mode (section 6-6).
b. Access
USER entry (see step 5b, page 16)
c. Enter
CLEAR as a satellite name.
d. Press
E twice to enter.
All satellites in memory will be deleted. (The predefined list of satellite names will still exist, but
you will need to reprogram the positions.)
6-8 FIX Mode
The FIX feature allows the controller to make a graceful recovery from sensor failure or the
unlikely event of an errant pulse count. By using this feature, the user simply has to correct for
one satellite location, and the RC1000A automatically will correct all others.
1. While
in MAN mode, jog the antenna to a satellite whose location was previously stored
in memory.
2. Proceed
to FIX mode (found in PROGRAMMING Mode Group.)
3.
Scroll through the list of assigned satellites using the A & B keys until the correct
satellite name is displayed.
4. Press
the E key, RESET, to recalibrate all stored satellite locations.
5.
The unit will respond with POSITION SET, and then returns to MAN mode.