Research Concepts RC1000 - Manual (Page 14)

RC1000A Antenna Controller...........................................................6-7 Delete Mode 12
6-2 SWITCH FUNCTION
To simplify instructions, the key or button descriptions will always be shown in enhanced text.
MODE
This pushbutton selects between Operation and Programming mode groups, and the
mode within each group. The current mode will always be displayed on the screen in the
upper right hand corner. See appendix for additional MODE information if using a remote
control option.
OPERATION MODE GROUP
AUTO
Automatic
MAN Manual
PROGRAMMING MODE GROUP
LIM
Limits
SET Set satellite & polarization position in memory
DEL Delete satellite from memory
FIX Correct position readout errors
SPEED Adjust fast & slow speed voltages for load
AUTO-POL Slaves the unit to a receiver with H/V output signals
To change from OPERATION Mode Group to PROGRAMMING Mode Group, or vice-versa,
simply hold the
MODE button in for at least five (5) seconds, then release. The new mode will
not be displayed on the screen until you have released the MODE button. This will be referred
to in the text as:
Hold
MODE and release
To change from AUTO to MAN, or from LIM to SET, DEL, or FIX, scroll to your selection by
pushing the
MODE button once. This will be referred to in the text as:
Scroll
MODE