DeLorme Earthmate GPS PN-30 - Manual (Page 77)

75
Info Field Description
Coordinates: Secondary The coordinates for the current GPS location, cursor position, or map center in
the secondary format. The default is UTM/UPS. Change the format in Device
Setup > Units > Coordinates: Secondary.
Course The direction of travel on a route from the starting location to the destination
(finish or next stop). Expressed in degrees.
Device Odometer The total distance traveled in all trips.
Distance to Finish The distance from the current location to the route finish.
Distance to Next Stop The distance from the current location to the next stop in the route.
Distance to Next Turn The distance from the current location to the next turn in the route.
Elevation: Barometer The altitude (height) above or below sea level based on the barometric altimeter
reading. If the altimeter is calibrating, a red exclamation point displays.
Elevation: GPS The altitude (height) above or below sea level based on the GPS reading.
Elevation: Maximum The maximum elevation achieved. Expressed in distance.
Elevation: Minimum The minimum elevation achieved. Expressed in distance.
ETA at Finish The estimated time of arrival at the route finish. Expressed as hours:minutes
AM/PM, based on the current device time.
ETA at Next Turn The estimated time of arrival at the next turn in the route. Expressed as
hours:minutes AM/PM, based on the current device time.
ETA at Next Stop The estimated time of arrival at the next stop in the route. Expressed as
hours:minutes AM/PM, based on the current device time.
Finish The Finish label as it appears in the route directions.
GPS Accuracy The calculated accuracy of the GPS. The actual location is within plus or minus
the distance indicated of the location represented by the GPS. Expressed
in distance.
Info Fields Table