REMKO CMF-80 v.1 - Manual (Page 8)

REMKO CMF / CMT
Changing the process water temperature
The main menu
appears after
pressing the
Home button.
Press the
F button next
to hot water.
Press the F
button next
to T-WW 1
setpoint
.
Set the
desired supply
temperature
with the rotary
knob.
Confirm the
new value with
the F-button
next to OK.
Press the F
button next to
Controller
.
Press the F
button next to
User
.
Mo 22 Sep 08 08:30
T-external 15.3 °C
T-collector 36.2 °C
Automatic 1
Main menu
01 End
Terminal
Controller
Controller
01 End
Displays
User
Time program
User
01 End
Plant
Hot water
Heating circuit 1
Hot water
01 End
1x hot water off
T-WW 1 setpoint 50.0 °C
T-WW 2 setpoint 60.0 °C
T-WW 1 setpoint
End
50.0 °C
Standard
OK
T-WW 1 setpoint
End
55.0 °C
Standard
OK
Hot water
01 End
1x hot water off
T-WW 1 setpoint 55.0 °C
T-WW 2 setpoint 60.0 °C
Mo 22 Sep 08 08:30
T-external 15.3 °C
T-collector 36.2 °C
Automatic 1
Pressing the F button
next to End, you move
one level back, without
saving a value.
Alternatively you
can return to the
standard display by
pressing the Home
button.
* The following illustration is an example and may be
different depending on the plant configuration.
* See note below
8