REMKO HTL 400 - Manual (Page 19)

19
Technical data
We reserve the right to make changes in dimensions and design in the interest of technical advance.
1) at ∆
t
45K / 1.2 kg/m 3 (free flowing)
2) The nozzle sizes and pump pressures stated are based on test bed results.
The oil throughput was stated in litres.
Because of product-specific nozzle and pressure tolerances as well as oil temperature, the figures stated should only be viewed
as guidelines.
Series HTL 400
Nom. heat load max . 2. Stage kW 385
Nom. heat load max. 1. Stage kW 270
Nom. heat output max. 2. Stage kW 350
Nom. heat output max 1. Stage kW 245
Ventilating performance max. 1) 2. Stage m 3 /h 25000
Ventilating performance max. 1) 1. Stage m 3 /h 16600
Pressure (max. total.) 2. Stage Pa 1000
Pressure (max. total.) 1. Stage Pa 500
Fuel EL heating oil or diesel
Fuel consumption max. 2. Stage l/h 39.0
Fuel consumption max. 1. Stage l/h 28.0
Nozzle (Danfoss) 80° H 2) USG 6.0
Pump pressure, approx. 2) 2. Stage bar 22
Pump pressure, approx. 2) 1. Stage bar 11
Voltage supply V 400 3~N
Frequency Hz 50
Elect. current consumption max. 2. Stage A 20.5
Elect. current consumption max. 1. Stage A 10.5
Elect. power consumption max. 2. Stage kW 9.1
Elect. power consumption max. 1. Stage kW 3.9
Fuse protection (on site) A 32
chimneys connection ø mm 300
Dimensions: Length mm 3850
Width mm 1200
Height mm 1900
Weight kg 1600