REMKO MD 261 - Manual (Page 12)

The activation and switch-off time can be programmed with this button.
The timer is activated/deactivated by means of pressing the timer on
and the timer off button. The timer symbol ON TIMER or OFF TIMER
appears. The desired activation or switch-off time for the display up to
9.5 (hours) in 30 minute intervals and from displayed 10 in 60-minute
intervals can be adjusted by means of pressing the Timer on or the Timer
off buttons.
When the programmed time has been reached, the device is
automatically turned on or off. If the indoor unit is automatically
switched on, then the mode, the temperature and the fan speed of the
last settings is reactivated.
The prior deletion of the on and off time can be achieved by pressing
On/Off button. The timer display on the indoor unit goes out.
TIMER Button • TIMER-ON / OFF
TIMER ON button - activation delay
TIMER ON Activation-
delay
TIMER OFF button - switch-off delay
Switch-off
delay
Manual air distribution
There are individually adjustable
fins for adjusting the horizontal air
distribution on the air discharge
side.
Moving indoor machinery,
e.g. fans, have the potential to
cause injury during operation!
Only make adjustments when
swing operation is switched
off.
CAUTION
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
TIMER
ON
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
TIMER
ON
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
TIMER OFF
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
TIMER
OFF
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
TIMER
OFF
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
Turbo
Shift lever left
Manual air distribution
Shift lever right
REMKO MD
12