REMKO RKL 490 DC - Manual (Page 5)

The device is particularly suited for
flexible operation, but can also be
mounted in a stationary installa-
tion.
The mobile air conditioning unit
is comprised of an indoor unit for
setting up on the floor indoors and
an outdoor unit for wall or ground
installation outdoors. In "cooling"
mode, the output produced by the
compressor precisely matches itself
to requirements, and thereby regu-
lates the nominal temperature with
minimal temperature deviations.
This "inverter-technology" results
in energy savings over conventional
split systems and also reduces noise
emissions to a particularly low level.
The flexible connection pipe serves
to transport the heat outdoors.
The outdoor unit discharges the
absorbed heat to the outdoor air
by means of a heat exchanger
(condenser). The condensate col-
lected during cooling operation is
transported to the outdoor unit
by means of a condensate pump
integrated into the indoor unit and
evaporates via the heat exchanger.
The device filters and dehumidi-
fies the air and thereby creates
a comfortable room climate.
It works fully automatically and
offers numerous additional op-
tions thanks to its microprocessor
control system. The device can be
conveniently operated by means
of the infrared remote control unit
included.
Equipment description
The equipment is shipped in sturdy
transport packaging. Immediately
check the equipment on delivery
and make note of any damage or
missing parts on the delivery note
and inform the forwarding agent
and your contractual partner.
No warranty can be assumed for
later claims.
Transport and
Packaging
Connector pipes
Air filter
Mount for
the outdoor unit
Air intake
Cover
Mains lead with plug
Condensate
drain
Rear view (indoor unit)
Air outlet
Control panel
Recessed grip
Air intake
Indoor unit Outdoor component
Front view
Condenser fan
(back side)
Connector pipes
Air outlet
Conveyor rollers
Carrying
handle
Ventilation louvers
Infrared receiver
5