beautypg.com

Dukane Projector 8794H-RJ User Manual

Page 45

background image

45

Item

Description

STANDBY MODE

Using ▲/▼ buttons switches the standby mode setting between

NORMAL and SAVING.

NORMAL ó SAVING

When SAVING is selected, the power consumption in the standby

mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control

except to turn the projector on and the network function are disabled

while the projector is in the standby mode. If the COMMUNICATION

TYPE in the COMMUNICATION menu is set to NETWORK

BRIDGE, all of the RS-232C commands are disabled (59).

• When SAVING is selected, STANDBY setting of AUDIO SOURCE

(46) is invalid, and no signal is output from

AUDIO OUT port in

the standby mode.

• When SAVING is selected, STANDBY setting of MONITOR OUT

is invalid, and no signal is output from

MONITOR OUT port in the

standby mode.

MONITOR OUT

While the image signal from the input port chosen in step (1) is

projected, the image signal from the input port selected in step (2) is

output to

MONITOR OUT port.

(1) Choose a picture input port using ▲/▼ buttons.

Choose STANDBY to select the picture

output in the standby mode.

(2) Select one of the

COMPUTER IN ports

using ◄/► buttons.

Select OFF to disable the

MONITOR OUT

port for the input port or standby mode

chosen in the step (1).

• You cannot select COMPUTER IN2 for COMPUTER IN1, and vice

versa.
• If you have changed the setting of STANDBY, it applies only to

the current standby mode, NORMAL or SAVING, selected under

STANDBY MODE, without changing the setting of the other mode.

The factory settings are as follows:

- COMPUTER IN1 for the NORMAL mode of STANDBY MODE
- OFF for the SAVING mode of STANDBY MODE

SETUP menu

This manual is related to the following products: