Englis – Denon AVR-2802/982 User Manual
Page 49
ENGLIS
49
VOLUME LEVEL
AUTO
LOCK
STAND BY
DIGITAL
PCM
SIGNAL
DIGITAL
INPUT
REMOTE
SENSOR
B
2
1
1,3
• Operating the surround mode and surround parameters from the main unit‘s panel.
1
Turn the SELECT knob to select the surround mode.
SELECT
• When turned clockwise
1
DIRECT
1
STEREO
1
DOLBY PRO LOGIC
II
1
DTS NEO:6
1
5/6CH STEREO
0
MATRIX
0
VIDEO GAME
0
JAZZ CLUB
0
ROCK ARENA
• When turned counterclockwise
0
DIRECT
0
STEREO
0
0
DTS NEO:6
0
5/6CH STEREO
1
MATRIX
1
VIDEO GAME
1
JAZZ CLUB
1
ROCK ARENA
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 52.)
SURROUND
PARAMETER
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
(Main unit)
(Main unit)
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
then operate the selector.
SURROUND
MODE
(Main unit)
DOLBY PRO LOGIC
II
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC, DTS NEO:6 modes and the input signal switches to a digital
signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode
automatically switches to DTS surround.
• When the “5CH/6CH STEREO” mode is selected, the display differs according to the SB CH OUT setting.
Surround Back CH ON
: 6CH STEREO
Surround Back CH OFF : 5CH STEREO
0
MONO MOVIE
1
MONO MOVIE