Denon AVR-2802/982 - Manual (Page 25)

ENGLIS
25
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1 At the System Setup Menu select “On Screen Display”.
2
3
4
ENTER
ENTER
Switch to the On Screen Display screen.
Select “ON” or “OFF”.
Enter the setting.
The System Setup Menu reappears.
Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it
using the manual “Preset memory” operation.
1 Use the CURSOR buttons to specify “Auto Tuner Presets” from the
“System Setup Menu” screen.
ENTER
2 Press the ENTER button.
The “Auto Preset Memory” screen appears.
3 Use the CURSOR button to select “Yes”.
“Search” flashes on the screen and searching begins.
“Completed” appears once searching is completed.
The display automatically switches to screen.
This completes system setup. Once these settings are made, there is no need to change them unless different AV components are connected
or the speakers are repositioned.