RADO Ceramica_Multifunction - Manual (Page 3)

Turning the crown quickly alters
the month, turning slowly alters
the date.
Push the crown back in. The
month display disappears, the sec-
onds display is visible again.
Note:
The number of the month is not
continually displayed, but it is
memorised. It must be correctly
set so that the calendar functions
properly.
Leap year: 29th February
The date of 1st March is displayed
after 28th February even in leap
years.
This can be corrected as follows:
Select Function 2 (seconds and
date display). Pull the crown out
and adjust the date one day back,
so that 29th February is displayed.
Push the crown back in again.
3. Adjusting the
day-of-the-week display
Select Function 3 (day and date
display) and pull the crown out.
The day display flashes and instead
of the date appears the selected
language:
Midi-size = e/f/s/d
Maxi-size = e/f/s
f = French, e = English, s = Spanish,
d = German.
Set the day and the desired lan-
guage by turning the crown.
Setting the language
NB: The language changes when
the day changes from Sunday to
Monday.
4. TM: Timer (hour and
minute counter)
Select Function 4 (TM).
Pull the crown out and set the
hours by turning the crown quickly,
the minutes by turning it slowly.
Push the crown back in: this starts
the countdown of the set time.