RADO Scuba_TheOriginal User Manual
Instructions for use of the scuba ‘the original
Key to enclosed diagram:
A) crown 1
B) crown 2
C) minute hand
D) hour hand
E) second hand
F) luminous point
G) turning ring
H) day and date display
Setting the time
Pull crown 2 out to position 2.
The second hand stops running.
Set the time by turning crown 2.
Then push crown 2 completely in.
The hands will begin to run again.
Setting the day/date
Pull crown 2 out to position 1. To
set date: turn crown 2 clockwise.
To set day of the week: turn
crown 2 anticlockwise. Push crown
2 completely in again.
Instructions for use of the Scuba ‘The Original’
Congratulations on your choice of this Rado watch and thank you for
your trust. These instructions will help you to use your watch correctly:
The model you have chosen has the following characteristics: it is water-
resistant to 200 metres (656 ft), is equipped with an automatic move-
ment with day and date display, has a scratchproof hardmetal bezel, a
separately adjustable inner turning ring and a dial and hands with lumi-
nous index points.