QVidium Pro-MPEG DVB-ASI Gateway - Manual (Page 14)

Pro-MPEG DVB-ASI Gateway QVidium™ Technologies, Inc.
Quick Start Guide 14/18 © 2006 QVidium™ Technologies, Inc.
4.2 Starting a network receive stream
Enter http://IPAddress where IPAddress is the IP address of the management interface
or the media interface.
1. Select
the RX Stream menu on the left side of the web page.
2. Select
the Streams menu option underneath the RX Stream menu.
A Network Receive Streams interface should display in the main area to the right of the
menu system.
3. Select a stream from the list.
4. Select
the Start button. You should see:
Stream 'name' started.
where name is the stream you selected in step 3.
4.3 Stopping a network receive stream
Enter http://IPAddress where IPAddress is the IP address of the management interface
or the media interface.
1. If
the RX Stream menu is not shown, select the RX Stream menu on the left side of the
web page.
2. Select
the Stop menu option underneath the RX Stream menu. You should see the
following message at the top of the web page main area.
Stopping ASI transmit...
ASI transmit stopped. Network no longer receiving stream.