QVidium Pro-MPEG DVB-ASI Gateway - Manual (Page 12)

Pro-MPEG DVB-ASI Gateway QVidium™ Technologies, Inc.
Quick Start Guide 12/18 © 2006 QVidium™ Technologies, Inc.
3.2 Starting a network transmit stream
Enter http://IPAddress where IPAddress is the IP address of the management interface
or the media interface.
1. Select
the TX Stream menu on the left side of the web page.
2. Select
the Streams menu option underneath the TX Stream menu.
A Network Transmit Streams interface should display in the main area to the right of
the menu system.
3. Select a stream from the list.
4. Select
the Start button. You should see:
Stream 'name' started.
where name is the stream you selected in step 3.
3.3 Stopping a network transmit stream
Enter http://IPAddress where IPAddress is the IP address of the management interface
or the media interface.
1. If
the TX Stream menu is not shown, select the TX Stream menu on the left side of the
web page.
2. Select
the Stop menu option underneath the TX Stream menu. You should see the
following message at the top of the web page main area.
Stopping network transmit stream...
Network transmit stopped. ASI no longer receiving stream.