Add pre-ground coffee, Fill beans container, Descale – DeLonghi ESAM6600 User Manual
Page 22: Press, Close door, Fill tank, Ground too fine adjust mill and, Insert water spout and press ok, Empty grounds container, Insert grounds container
![background image](/manuals/78421/22/background.png)
21
C o l l e c t i o n
19 TROUBLESHOOTING
ADD PRE-GROUND
COFFEE
•
With the function selected, the pre-
ground coffee has not been poured into
the funnel.
•
Add the ground coffee as described in
section 9.
FILL BEANS CONTAINER
•
The coffee beans have run out.
•
If the coffee grinder is very noisy, this
means a small stone in the coffee beans
has blocked the mill.
•
Fill bean container.
•
Contact an authorized De' Longhi serv-
ice center.
DESCALE
•
This indicates the presence of lime scale
in the appliance.
•
The descaling procedure, described in
section 17.3, needs to be performed as
soon as possible.
PRESS
•
After cleaning, the infuser has probably
been left out of the coffee maker.
•
Leave the service door closed and the
infuser out of the appliance, press the
pointed buttons,
then follow the
instructions displayed.
CLOSE DOOR
•
The service door is open
•
If the service door cannot be closed,
check that the infuser is inserted cor-
rectly (section 16.2 - note 1).
MESSAGE
MEANING
WHAT TO DO
FILL TANK
•
The water tank is empty or is positioned
incorrectly.
•
The tank is dirty or encrusted with lime
scale.
•
Fill the water tank as described in sec-
tion 4, and insert it fully.
•
Rinse or descale the tank.
GROUND TOO FINE ADJUST MILL
AND
•
The appliance cannot make coffee.
•
Insert the hot water spout, press the
button and run off water from the spout
for a few seconds.
INSERT WATER SPOUT AND
PRESS OK
•
The coffee runs off too slowly.
•
Turn the grinding regulator (fig. 11) one
click toward the number 7 (see section
8).
EMPTY GROUNDS CONTAINER
•
The grounds container is full or missing.
•
Empty the grounds container and clean
as described in section 6, note 7, then
replace.
INSERT GROUNDS CONTAINER
•
After cleaning, the grounds container
has not been replaced.
•
Open the service door and insert the
grounds container.
INSERT INFUSER ASSEMBLY
•
After cleaning, the infuser has probably
been left out of the coffee maker.
•
Insert the infuser, see section 16.2.
INSERT WATER SPOUT
•
The button has been pressed and
the hot water spout has not been insert-
ed.
•
Insert the hot water spout (fig. 4).
GENERIC ALARM
LESS COFFEE
•
The inside of the appliance is very dirty.
•
Clean the inside of the appliance thor-
oughly, as described in section 16.2. If
the message is still displayed after clean-
ing, contact a service center.
•
The ground coffee funnel is clogged.
•
Too many coffee beans or too much
ground coffee has been added.
•
Empty the funnel with the help of a knife,
as described in section 9, note 5 (fig. 16).
•
Select a milder taste or reduce the quan-
tity of ground coffee, then press or
or or to deliver
the coffee again.