PSE Archery X Factor - Manual (Page 7)

In order to assure the limbs and the riser are in proper alignment the following
steps should be followed:
1. Place the bow in front of you and stand so that the bowstring is perfectly
aligned with the riser. The stabilizer can be used to determine if the bow is
aligned properly.
2. With the string lined up with the center of the riser, the stabilizer should
also align with the string. Neither side of the window on the riser should be
visible. See Figures 1 and 2. Adjust the pockets so that the string is
aligned with the center of the riser and limbs as well as the stabilizer.
3. When the bow is adjusted properly, it will look like the bow shown in
Figure 3 with the inside of the window showing a little.
-7-
Stabilizer
Stabilizer
Figure 1
Figure 2 Figure 3