PSE Archery Bow 2009 - Manual (Page 12)

Position the limb rollers outward on the limbs so that when the riser is pulled down the bow
does not slip through/between the rollers before releasing tension on the string and cables. The
rollers must be at least 4” from the limb pockets or the limbs will break. While placing tension
on the limbs, BE VERY CAREFUL NOT TO PULL THE RISER DOWN TOO FAR. DEFLECT THE
LIMBS JUST ENOUGH TO REMOVE THE STRING AND CABLES.
Never allow the rollers to go past the belly (thinnest part) of the limb.
Service such as peep and vibration damper installation and string replacement can be
performed with a Pocket Press portable bow press (item #01169) available from your
local PSE dealer. Item #01170 and #01031 are pocket presses also available for
alternate axle-to-axle lengths.
12
SERIAL # OF BOW
BOW MODEL
NAME
ADDRESS
ADDRESS APT
CITY STATE
COUNTRY POSTAL CODE
EMAIL ADDRESS
DATE PURCHASED / / PHONE ( )
IMPORTANT
WARRANTY REGISTRATION
THIS FORM MUST BE RECEIVED BY PSE WITHIN 30 DAYS OF PURCHASE TO ACTIVATE WARRANTY
REGISTRATION
Fill out this form completely, remove it, and mail to:
PSE WARRANTY REGISTRATION
P.O. Box 5487
Tucson, AZ 85703
You can also register online at www.pse-archery.com/registration
09_PSE_Users_Guide_10_08:half.page.book.8.5x5.5 11/6/2008 1:50 PM Page 12