PSE Archery Fang Crossbow 2015 - Manual (Page 4)

CROSSBOW OWNER’S GUIDE
®
4
FANG CROSSBOW COMPONENTS
Before assembling your crossbow (Fig. 1), please check to see if all crossbow parts are
included: 1- Prod, 1- Stock, 3 - Crossbow Bolts, and 1 - Cocking rope (Fig. 1a), 1 - Prod
Bolt, 2 - Washers, 4 - Allen Wrenches, 1 - Rail Lube (not shown), 1 - Quiver Mount, 1 -
Foot Stirrup, and 1-Quiver (Fig. 2). If any of these parts are missing please contact PSE
Customer Service.
Cable slide should come installed. If it is not, please attach cable slide to the cables with the
concave area facing up and the cables in the two grooves as shown. Fig. 3
Connect the barrel and the riser by inserting the cable slide and cables into the slot on the
barrel as shown in Fig. 4a. Be sure the concave side is facing up to match with the contour
on the inside of the barrel.
Push the cables into the track and position the riser for connection to the barrel using the
prod bolt and washer and hex key provided. Tighten the center set screw to lock the barrel
connector, in order to hold the riser in the correct position. Fig 4b.
Insert the foot stirrup into the two holes on the front of the riser. Fig 5a. Make sure the two
notches in the foot stirrup are facing towards the set screws used to secure the stirrup.
Fig. 5b
Comfort Molded Grip
Full Barrel Picatinny Rail
Adjustable Picatinny
Mounted Foregrip
Large Boot Style Foot
Stirrup
Lightweight Integrated
Synthetic Stock/Barrel
4x32 Multi-Range Scope
Precision Trigger / Auto Safety
Rope Cocking Groove
Fig. 1
Cam
Limbs
Quiver
Prod Assembly