Directed Electronics K10 - Manual (Page 4)

5
H1/2 WHITE (-) Parking Light Output
This wire provides a (-) 200mA output to flash the parking lights. This is suitable for driving (-) light
control wires in Toyota, Lexus, BMW, some Mitsubishi, some Mazda, etc. If the vehicle has a positive
parking light circuit, a relay must be used to flash the parking lights.
H1/3 WHITE/BLUE (-) Channel 3 Output
This wire provides a (-) 200 mA output whenever the transmitter code controlling Channel 3 is received.
This output will continue as long as that transmission is received. Use for options such as a start system,
or power window controllers, etc.
H1/4 BLACK/WHITE (-) 200 mA Domelight Supervision Output
Connect this wire to the optional domelight supervision relay as shown in the following diagram:
IIM MPPO ORRTTA AN NTT!! This output is only intended to drive a relay. It cannot be connected directly
to the domelight circuit, as the output cannot support the current draw of one or more bulbs.
IIM MPPO ORRTTA AN NTT!! Never use this wire to drive anything but a relay or a low-current input! The
transistorized output can only provide 200 mA of current, and connecting directly to a sole-
noid, motor, or other high-current device will cause it to fail.