Posiflex KB-6800 - Manual (Page 12)

Part 12
utility can set each individual track enabled or disabled for reading data, or
data sending out under “Alt”+”Num” approach or having the start/end
sentinels altered or changing the data transfer rate.
V. SPECIFICATIONS
CONSTRUCTION: Spill-proof, 70 keys + 6 position control
key
LED COLOR: Power on – Green
MSR – Green & Red (for KB-6800 only)
KEY SWITCH TYPE: membrane plus rubber dome
KEY STROKE TRAVEL: 3.2 mm
KEY TOP SIZE: 18 x 22 mm for normal keys
PREPRINTED KEYS: “.”, “00”, “0” to “9”
KEY CAP: 18 x 22 mm transparent
PROGRAMMABILITY:
METHOD:
Software programming under DOS
(KB-6800 only), Win98, Win 2000,
Win XP embedded or Win XP Pro without TSR
program
COVERAGE: 70 keys by 5 pages + one 6-position control key
with answer back code
CODE TYPE: Keyboard scan codes (KB-6800)
HID Usage ID Codes (KB-6800U)
LANGUAGE: English or European, software configured
KEY-CONTENTS
LENGTH:
1 - 255 byte(s)/key
MEMORY: Non-volatile memory, 8KB
INTERCHARACTOR
OUTPUT SPEED:
programmable 0 - 140 msec
TIME DELAY: programmable 0 - 240 sec
MULTILEVEL: 8 levels max.(Only for KB-6800)
DOWN LOAD SPEED:
≤
40 sec. For 8 KB (KB-6800)
≤
20 sec. For 8 KB (KB-6800U)
CONTROL KEY:
l 6 positions (LP, L0, L1, L2, L3, L4), key extractable at L0 and L1
l
Hardware lock off all keyboard data output at L0 after transmitting
answer back code if programmed
l Capable of giving programmable answer back code of each position
on position change of the key
l Capable of giving programmable answer back code of each position
on receiving a specific code command from host computer