Posiflex CR-6000 Series - Manual (Page 7)

Part 7
2).
Connect USB connector of cable coming out from the rear side of the
USB interface cash drawer to USB port of main PC.
3).
Check the specification of power adaptor on its nameplate. Insert the
power adaptor into the correct power outlet. Insert the output plug to the
jack at rear side of CR4005-II/ 4105-II/ 4215-II/ 6215 to supply power
for drawer kickout.
4).
Install the USB utility driver from Posiflex Product Information CD
with Posiflex POS system or visit our web sites
http://www.posiflex.com or http://www.posiflex.com.tw or
http://www.posiflexusa.com for latest updates.
UPOS driver application (Applied for all Posiflex cash drawer)
Please first find in Posiflex Product Information CDROM or
download from Posiflex web sites for UPOS driver setup. In this application
CR4XX3 and CR4XX4/ 6214 respond to openDrawer command only;
CR4XX0/ 6210, CR4XX1 and CR4XX2 are compliant to UPOS version 1.7
and CR4015/ 4115/ 4225/ 4XX5-II/ 6015/ 6215 are compliant to UPOS
version 1.8.
SPECIFICATIONS
MECHANICAL: Dimensions:
428 (W) x 460 (D) x 100 (H) mm (CR-4000)
428 (W) x 456 (D) x 100 (H) mm (CR-6000)
Weight: 7.0 Kg (CR-4000)
8.8 Kg (CR-6000)
Removable tray with a lock-on cover (option)
ELECTRICAL:
Power Source
Solenoid Drive (for CR-4000 / 4020 / 4100 / 4210 / 6210)
Pulse Amplitude 12 to 24 VDC
Pulse Width 100 to 250 msec
Pulse Duty Cycle 10% max.
Max. Current Consumption 0.75A @ 12 VDC/1.5A @ 24 VDC
AC Adaptor (for CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/
4213/ 4005-II/ 4105-II/ 4215-II/ 6215)
Input Voltage 120 VAC ± 10 % / 240 VAC ± 10 % @50
-60 Hz
Output Voltage 12 VAC at 1.5 A