Posiflex CR-6000 Series - Manual (Page 3)

Part 3
a).
For CR4000/4020/4100/4210/6210: The standard signal cable is
21863018010 which has a 8 pin plug at one end to connect to the cash
drawer and a 6 pin plug at the other end to connect to the POS
system/printer. This cable serves for most popularly used POS
equipment such as all Posiflex POS terminals, all Posiflex POS printers,
most Epson POS printers, most Star POS printers and all other
compatibles. The user may cut the 6 pin end and assemble this free end
according to his POS printer specification if the POS printer used
utilizes different connection. The cable connection on the wires is as
below:
Wire color RJ45 Function
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
b).
For CR4001/ 4101/ 4211/ 4002/ 4102/ 4212: 21863137210
/21863237210 with one 9PM and one 9PF connector.
c).
For CR4003/ 4103/ 4213: 21863231810 with one 25PM and one 25PF
connector.
d).
For CR4004/ 4104/ 4214/ 6214: The serial signal cable is already built
on.
e).
For CR-4015/ 4005-II/ 4115/ 4105-II/ 4215-II/ 4225/ 6015/ 6215: USB
cable is already built on.
6.
Power Source depend on model
a).
For CR-4000/ 4020/ 4100/ 4210/ 6210: not applicable
b).
For CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213/
CR4005-II / 4105-II/ 4215-II/ 6215: Power adapter 12VAC 1.5A
c).
For CR4004/ 4104/ 4214/ 6214: Power connector cable and I/O
bracket plate.
d).
For CR-4015/ 4115/ 4225/ 6015: There is no power adaptor needed,
the power source drain from USB port directly.