Posiflex PD-2800UE - Manual (Page 3)

Page 2
INSTALLATION FOR STAND ALONG MODEL
For this type mechanical design of standalone customer pole display, it can
operate straight away and no needs to assemble with any other host system.
Nevertheless, it also can fix on the counter or any place when it needs to be
fixed. Following pictures A to D will describe such as how to adjust the height
of the pole and how to fasten the PD-2800/320 in a flat surface.
Picture A is going to describe how to adjust the height of customer displays:
a). Please hold the compression lock by using thumb and index finger
and pull out the lock.
b). Please use another hand to hold the tube and extend to higher or
lower of display’s height. After adjust to a satisfied height, please
push back the compress lock to fix the tube.
A B
a
b
C
D