Posiflex HS-2510W - Manual (Page 12)

12
Specifications
HS-2510W HS-2512W
CPU
Intel Bay Trail-D J1900 2.0G CPU up to 2.42G, 2M Cache, quad-
core Celeron CPU
Memory DDR3L 1333 FSB, SO-DIMM socket *1, Max 8G
OS
POSReady 7, Windows 7, Windows Embedded 8.1 Industry,
Android per request
Display
9.7" 1024 x 768 LCD P-CAP
touch panel
12" 1024 x 768 LCD P-CAP
touch panel
VGA
Interface
D-SUB 15 Pin, with 12V power for Posiflex LCD Monitor
Storage
Two SATA ports for 2.5'' or 1'' SATA device; EMMC adaptor
Board 8G/16G/32G on M/B
Ethernet 10/100/1000 Mb, 1 port
Wireless
LAN
Optional, with a reserved external antenna
Power
Supply
12VDC power adaptor, 120W
Serial Port
3 ports – DB9 x 2 on bottom side (I/O plate), RJ-45 x 1 on top side
(I/O plate); +5V software switch control & jumper for COM1/2/3,
+12V jumper control for COM1/2/3
Parallel Port
Co-design for I/O plate DB25 connector or internal connector for
printer
CR Port 1 port, controlling 2 cash drawers
USB Port
4 ports, 1 USB3.0 port on the top I/O interface and 3 USB2.0 ports
on the bottom I/O interface
PS/2 KB Port 1 port on the bottom I/O plate
Audio 1 line-out jack
Extension
Slot
mini PCI-E slot, half-card size
Power
Switch
On M/B at right side wall of system, instant power ON when the
power switch is pushed.
Printer Built-in Printer
Power-Off
Control
By hardware switch or by software, continuous push for 2 ~ 3 sec to
enable the power OFF function
Power-ON
Wake-Up
Through alarm/LAN