Permasteel PG-50601SRL(N) - Manual (Page 31)

28
ƒ
TO LIGHT THE REAR BURNER BY MATCH:
1) Read instructions before lighting.
2) Open the lid during lighting.
3) Push and turn the rear burner knobs slowly to “ HI ” position, then release.
4) Push down the safety valve switch button with right hand and hold on, light by
match with left hand. Make sure the burner lights and stays lighted.
ƒ TO LIGHT THE SEARING BURNER OF THE GRILL:
1) Read instructions before lighting.
2) Turn all knobs to “ OFF ” then open the tank valve. Always keep your face and
body as far from the grill as possible when lighting.
3) Open lid during lighting.
4) Push and turn searing burner knob slowly to “ HI ” position with left hand 2
seconds later. The built-in igniter will click and spark simultaneously to light the
burner once burner lights. Turn the control knob to “ OFF ” and release the
button IMMEDIATELY if the burner does not light within 5 seconds. Wait 5
minutes for gas to dispel, then repeat the lighting procedure.
5) Follow match lighting instruction if burner can’t be lit after repeating 3-4 times.
ƒ
TO LIGHT THE SEARING BURNER BY MATCH:
1) Read instructions before lighting.
2) Open the lid during lighting.
3) Push and turn the searing burner knobs slowly to “ HI ” position, then release.
4) Light by match. Make sure the burner lights and stays lighted.
GRILL LIGHTING INSTRUCTION
OPERATING INSTRUCTION
ƒ TOTAL GAS CONSUMPTION:
Total gas consumption (per hour) of PG-50601SRL(N) grill with all burners on “HI”:
Main burners 60,000 Btu/hr
Searing burner 16,000 Btu/hr
Rear burner 14,000 Btu/hr
Side burner
12,000 Btu/hr
Total 102,000 Btu/hr