Leak testing – Permasteel PG-50601SRL(N) User Manual

Page 27

SAFETY TIPS:
1) Always check for leaks after every gas tank change.
2) Always check for leaks before each use.
3) Check all gas supply fittings for leaks before each use. It is handy to keep a

spray bottle of soapy water near the shut-off valve of the gas supply line. Spray
all the fittings. Bubbles indicate leaks.

4) Disconnected gas cylinders must have threaded valve plugs tightly installed, and

must not be stored in a building, garage, or any other enclosed areas.

5) Turn off all control knobs and gas tank valve when the grill is not in use.
6) If the appliance is stored indoors, the gas tank must be disconnected and

removed from the grill.

7) Gas tanks must store outdoors in a well-ventilated area. Disconnected gas tanks

in storage or being transported must have a safety cap.

8) Never leave a gas tank in a recreational vehicle or boat which may become

overheated by the sun.

9) Do not store gas tank in or near an area where children play.

TO TEST GAS LEAK ON NATURAL GAS GRILL

1) Make sure all control knobs are in the “OFF ” position.
2) Turn on the natural gas supply. If you hear a rushing sound, turn gas off

immediately. There is a major leak at the connection. Correct before proceeding.

3) Create a mixture of half water and half liquid dishwashing soap. Brush soapy

solution onto the following:
A. Quick-disconnect coupler
B. The full length of gas supply hose
C. Gas supply connection to gas manifold.

LEAK TESTING