Permasteel PG-50410SRLB - Manual (Page 8)

5
ASSEMBLY INSTRUCTIONS
wheItem Description Specification Quantity
1
Truss head screw
(With Split lock And Gasket)
1/4-20x5/8” 16 pcs
2
Truss head screw
(With Split lock And Gasket)
1/4-20x1/2” 32 pcs
3
Truss head screw
(With Split lock And Gasket)
5/32-32x1/2” 2 pcs
4
Truss head screw
(With Split lock And Gasket)
5/32-32x3/8” 20 pcs
5
Truss head screw
(With Split lock And Gasket)
1 pc
STEP I:
ƒ Take out bottom panel and four casters (two with brakes, two without brakes)
from packing carton.
ƒ Use 16 pcs 1/4”-20 x 5/8” screws to attached four casters on the back of
bottom panel. Each caster need 4 screws.
Note: The casters with brake should be mounted on the side closer to tank
hole.
Tools Required:
ƒ #2 Philips head screwdriver (not provided)
ƒ Hexagon/Allen wrench (provided).
ƒThe following hardware is provided: