Permasteel PG-50410SRLB - Manual (Page 15)

12
7) Place side burner valve in back of side burner control panel. Make sure valve
stem comes through large hole of the panel.
8) Secure gas valve to panel using the M4*6 screws which take off on Step 4.
9) Replace the side burner, placing end of burner over side burner valve. Valve
should be in center of burner tube.
10) Tighten the screws of side burner bracket A& B.
11) Beneath right side shelf, attach side burner igniter wire to valve electrode.
12) Press control knob onto valve stem, make sure it is turned freely. Replace
the side burner cooking grid.
ASSEMBLY INSTRUCTIONS
7 8
9 10
11
12